EBMX X-9000 V2 Adapter Kits

EBMX X-9000 V2 Controller Adapter Kits and Harnesses are available for a variety of electric motorbike makes and models including Surron, Talaria, E Ride Pro, and ReRode. The complete adapter kits for the X-9000 V2 Controller include the wiring harness, necessary hardware, as well as bash guards with some versions as described below.

*This product is the X-9000 V2 adapter kit or harness only - does NOT include X-9000 Controller - does not fit X-9000 V3.  X-9000 V3 Adapter Kits Here >

X-9000 V2 Controller Adapter Kits
Surron Light Bee	wiring harness
Surron Light Bee Race Harness	simplify your factory wiring for a clean install; designed for X-9000 V2 controller and EBMX encoder motors; includes hall sensor adapter and headlight adapter for the X-9000 internal 12V
Surron Ultra Bee	wiring harness, mounting brackets, hardware; stock display adapter, X-9000 to OEM wiring harness
Surron Ultra Bee Race Harness	this MX loom will swap out your OEM wiring harness, ready for MX racing; designed to meet FIM guidelines for E-Racing. NOTE: this will delete OEM display, light, and you can affix a Race Plate for MX Racing
Talaria Sting MX3/MX4/MX5	wiring harness, hardware
Talaria X3	wiring harness, brackets, hardware, bash guard
E Ride Pro 2.0 V2	(S / SS 2.0 battery) – wiring harness, mounting kit, bash guard with the original battery connector. (Does NOT fit E Ride Pro SS 3.0 / SR or V3 battery connector)
E Ride Pro 2.0 V3	(updated SS 2.0 / 3.0 battery lead) – wiring harness, mounting kit, bash guard with updated V3 battery connector (Does NOT fit E Ride Pro SS 3.0 / SR)
E Ride Pro 2.0 V3 Power Loom	V3 Battery Power Loom only – When E Ride Pro performs a warranty for the Pro-SS 2.0 battery, it's often replaced with a 3.0 battery and will need this power loom for the new battery connector.
E Ride Pro 3.0	wiring harness, mounting brackets, hardware for E Ride Pro SS 3.0 with V3 battery connector
ReRode R1	wiring harness, hardware, bash guard
QS138 Harness	If running a QS138 70H or 90H, EBMX has this custom loom for the QS motor with X-9000 ignition switch & throttle input plug designed to fit a YZF450. Note: wiring length may require adjustment depending on your build design. The lengths are designed for rear mounted controller. The QS138 90H and 70H motor tunes are pre-configured in the X9000 app, up to 22S.