EBMX X-9000 V3 Adapter Kits

EBMX X-9000 V3 Controller Adapter Kits and Harnesses are available for a variety of electric motorbike makes and models including Surron, Talaria, E Ride Pro, and ReRode. The complete adapter kits for the X-9000 V3 Controller include the wiring harness, necessary hardware, as well as bash guards with some versions as described below.

*This product is the X-9000 V3 adapter kit or harness only - does NOT include X-9000 Controller, not compatible with X-9000 V2.  X-9000 V2 Adapter Kits Here >

X-9000 V3 Controller Adapter Kits
Surron Light Bee	I/O Wiring Loom
Surron Light Bee Race Harness	Simplify your factory wiring for a clean install; designed for X-9000 V3 controller and EBMX encoder motors; includes hall sensor adapter and headlight adapter for the X-9000 internal 12V
Surron Ultra Bee	Ultra Bee Mounting Brackets Stock Display Adapter X-9000 to OEM Wiring Harness Mounting Hardware
Talaria Sting MX3/MX4/MX5	I/O Wiring Loom Mounting Hardware
Talaria X3	Side Mounting Brackets I/O Wiring Loom Skid Plate
Talaria X3 Pro	Mounting brackets X3 PRO Wiring Harness Metal Bash Guard
E Ride Pro SS 2.0 (Updated Plug)	Updated E Ride Pro SS 2.0 Battery Connector Plug 2.0 Side Mounting Brackets New Battery Leads Installation Hardware I/O Wiring Loom Skid Plate
E Ride Pro SS 2.0 (Old Plug)	If your E Ride Pro SS 2.0 has the Battery Connector, you will need this in order to install your EBMX X9000 V3 Controller. Note: This Battery Lead is prone to melting, which is why E Ride Pro has switched to the new connector.
E Ride Pro 3.0 (w/ Circuit Breaker)	If your E Ride Pro 3.0 has a circuit breaker, then choose this adapter kit option. Early releases of E Ride Pro SS 3.0 bikes came with breakers connected to the battery lead. 3.0 Side Mounting Brackets New Battery Leads I/O Wiring Loom Installation Hardware
E Ride Pro 3.0 (No Breaker)	If you have the latest E Ride Pro SS 3.0 that does not have a circuit breaker connected to the Battery Power Lead, then choose this adapter kit option. 3.0 Side Mounting Brackets New Battery Leads I/O Wiring Loom Installation Hardware
E Ride Pro SR	SR Side Mounting Brackets New Dual Battery Leads I/O Wiring Loom Installation Hardware
ReRode R1	Rerode Side Mounting Brackets I/O Wiring Loom Mounting Hardware
1-2 Harness (CANBus)	communicates to peripherals such as display and thumb throttle
QS138 Harness	If running a QS138 70H or 90H, EBMX has this custom loom for the QS motor with X-9000 ignition switch & throttle input plug designed to fit a YZF450. Note: wiring length may require adjustment depending on your build design. The lengths are designed for rear mounted controller.