Anbieter: EXT Racing Shox

EXT Ferro Fork + Arma Shock E-Moto Suspension Set

1.220,16 €2.301,44 €46% OFF
Adapters: No Adapter
Add Crown Race?: No Race Crown
Menge

Beschreibung

The EXT Ferro Fork and Arma Shock are among the most premium suspension upgrades for lightweight electric dirt bikes including Surron, Talaria, E Ride Pro, and more. Known for their reliability, performance, and customization, upgrade your ride confidently with the industry-leading e-moto suspension package.

EXT E-Moto Suspension Compatibility

  • Surron Light Bee X/S
  • Segway X160/X260
  • Talaria Sting MX3/MX4/MX5
  • Talaria X3
  • E Ride Pro S / SS 2.0 / SS 3.0 / SR
  • Ventus One
  • 79Bike Falcon
  • Altis Sigma

See EXT Ferro Fork compatibility chart below.

EXT Ferro E-MX Fork Features

  • Dual drop crown inverted MX design (USD)
  • 36mm hard-chromed steel stanchions (heat-treated 42CrMo4) with Superfinish surface treatment
  • HS3 3-twin positive air system + 1 large negative self-balancing air chamber = optimum support for all travel
  • High-flow, 3-way adjustable cartridge damper system with independent high/low speed compression + rebound damping adjustment
  • Superfinish inner tube coating
  • External pressure air release system on both legs
  • Twin hexagonal floating axle, boost compatible 20mm
  • Air spring and cartridge radial guide system with bespoke aeronautical seals (minimize friction on side loads)
  • Large piston design for best damping control and separate IFP/coil energized compression valve
  • No cavitation + low hysteresis
  • Self-hydraulic cartridge bleeding
  • Dedicated Mobile Sliding DU guiding system with super-long static overlap for maximum guidance and best torsional rigidity
  • Continuously Guided Bushing (CGB) system increases dynamic stiffness
  • 205 mm of travel and 44 mm offset
  • 200 mm post mount brake
  • Weight: 4000gr
  • Pressure release one-way valves on both legs
  • Compatible with stock fender design
  • Choose Warp 9 Boost Hub Spacer for more flexibility with aftermarket wheel sets

Note: If you are running a stock wheel or a wheel that is not specifically designed for use with BOOST hubs, you will need to install the Warp 9 Boost Hub Spacer (add-on option available).

Note: For older Surron Light Bee models, a head tube reinforcement clamp is recommended.

EXT Ferro Fork Compatibility

Make Model Direct Fit? Notes
Surron LBX Yes w/ Boost Rotor Spacer All model years compatible
Talaria MX3 / MX4 Yes w/ Boost Rotor Spacer Recommended: Drop Crown for MX / Flat for X3
X3
MX5 No MX5 version available soon
E Ride Pro S / SS 2.0 Yes w/ Boost Rotor Spacer N/A
3.0 / SR Yes w/ EXT Brake Adapter Fits SR model, but will not be covered by warranty.
Ventus One/One+ N/A Yes w/ Boost Rotor Spacer N/A
79Bike N/A Yes w/ Boost Rotor Spacer N/A
Rawrr Mantis / X Yes w/ Boost Rotor Spacer N/A
Zero XB Yes w/ Boost Rotor Spacer N/A
ReRode R1 / EWatt 2.0 Yes w/ Boost Rotor Spacer N/A
Altis Sigma N/A Yes w/ Boost Rotor Spacer N/A

EXT Arma E-MX Shock Features

  • Fully-Customizable Hydraulic Setup: specific for each rider / bike
  • Lightweight Spring Options: 400/450/500/550/600 lbs (lower weight available upon request)
  • Full Length and Travel: 10.5" x 3.5" shock - don't use with 1.5″ riser linkage
  • 4-way Adjustable Hydraulic Bottom-Out Control: LSC-HSC-LSR-HBC
  • Easy Installation: direct, bolt-in, no additional hardware needed
  • Dedicated Eyelet Design: spherical bearing on both ends
  • Main Piston: high-flow 29mm / Valve Piston: 24mm
  • Shaft: 14mm - 50% larger than most coils for handling large side-loading events
  • Rebound Circuit: engineered to separate bump and rebound oil flow (ultra-low friction coating)
  • Very Low Reservoir Pressure: maximum sensitivity and low cavitation (55 PSI)
  • Very Low Hysteresis:  high dynamic response
  • High Turbulent Flow for progressive dampening + mid stroke support
  • Low-Friction Seal
  • Thin Bottom-Out Bumper
  • Washer for clearing debris
  • Low-Profile Rebound Knob for easy spring swap
  • Includes (1) lightweight spring available in 400, 450, 500, 550, or 600 lbs
  • Includes mounting hardware for easy bolt-in installation
Arma Spring Size Guide
Rider Weight Spring Size
Up to 140 lbs 400
140-180 lbs 450
180-210 lbs 500
210-240 lbs 550
240+ lbs 600

Note: This chart is a general guide for choosing your spring size. For firmer or softer preference, select a spring weight size above or below. For the maximum weight limit, please refer to the Sur-Ron, Segway, or Talaria manufacturers guidance.